Product Type:
Brake Modules
RM310 - Parking Brake Installation Details and Parts List
The brake module bolts directly onto the motor mounting face and has exactly the same interface as the motor. As shown on the drawings, the brake consists of two spring applied shoes pressed against a pressure to the cylinder/piston assembly. The brake torque can be varied by means of two spring adjusters but it is normally set so that a pilot pressure of 4.1 bar / 60 psi will fully release it. Pressures below this level will progressively reduce the braking torque available. The brakes are set at the plant but it may be necessary to make adjustments on site to suite the individual application.
